Peptide dosing chart: units, mL and mg/mL for every compound

What does a peptide dosing chart show?

It shows how the water in a vial changes the concentration and the syringe units, not how much to take. Each row here is one vial at 1, 2 and 3 mL of water, or at its label's own volume. A 5 mg vial in 2 mL is 2.5 mg/mL, so 10 units on a U-100 syringe hold 0.25 mg.

Updated . Last editorial review by The PinPoint team

This peptide dosage chart covers each of the 19 reconstitutable generic entries in PinPoint's website compound library, across peptide, GLP-1 and ancillary records. The one-sheet table gives every vial's concentration at 1, 2 and 3 mL of water and what 10 U-100 units hold. Each compound's units chart, on its calculator page and linked from both tables, pairs that vial with amount-to-units tables and, for compounds with an approved label, the label's own amounts.

What does each library vial give at 1, 2 and 3 mL?

Read across a row to see how one vial changes as the water volume grows: the amount stays the same and spreads through more liquid, so each unit holds less. The small line in each cell is the amount in 10 units, which is 0.1 mL on a U-100 syringe. Two vial sizes come from product labels (HCG 5,000 units, tesamorelin 2 mg), and those rows give the label's own volumes. The other 17 are example sizes for arithmetic, not products. None is a dose.

Concentration of each library vial at 1, 2 and 3 mL of water, and the amount in 10 U-100 units (0.1 mL)
CompoundVial1 mL water2 mL water3 mL water
AOD-96045 mg (example input)5 mg/mL10 units: 0.5 mg2.5 mg/mL10 units: 0.25 mg1.6667 mg/mL10 units: 0.1667 mg
BPC-1575 mg (example input)5 mg/mL10 units: 0.5 mg2.5 mg/mL10 units: 0.25 mg1.6667 mg/mL10 units: 0.1667 mg
Cagrilintide5 mg (example input)5 mg/mL10 units: 0.5 mg2.5 mg/mL10 units: 0.25 mg1.6667 mg/mL10 units: 0.1667 mg
CJC-1295 (no DAC)5 mg (example input)5 mg/mL10 units: 0.5 mg2.5 mg/mL10 units: 0.25 mg1.6667 mg/mL10 units: 0.1667 mg
CJC-1295 (with DAC)2 mg (example input)2 mg/mL10 units: 0.2 mg1 mg/mL10 units: 0.1 mg0.6667 mg/mL10 units: 0.0667 mg
DSIP5 mg (example input)5 mg/mL10 units: 0.5 mg2.5 mg/mL10 units: 0.25 mg1.6667 mg/mL10 units: 0.1667 mg
GHK-Cu50 mg (example input)50 mg/mL10 units: 5 mg25 mg/mL10 units: 2.5 mg16.6667 mg/mL10 units: 1.6667 mg
HCG5000 IU (label)The HCG label gives 1 mL of bacteriostatic water (5,000 units/mL) or 10 mL (500 units/mL). The 2 and 3 mL volumes are not label volumes. [source]
IGF-1 LR31 mg (example input)1 mg/mL10 units: 0.1 mg0.5 mg/mL10 units: 0.05 mg0.3333 mg/mL10 units: 0.0333 mg
Ipamorelin5 mg (example input)5 mg/mL10 units: 0.5 mg2.5 mg/mL10 units: 0.25 mg1.6667 mg/mL10 units: 0.1667 mg
MOTS-c10 mg (example input)10 mg/mL10 units: 1 mg5 mg/mL10 units: 0.5 mg3.3333 mg/mL10 units: 0.3333 mg
NAD+500 mg (example input)500 mg/mL10 units: 50 mg250 mg/mL10 units: 25 mg166.6667 mg/mL10 units: 16.6667 mg
PT-14110 mg (example input)The 10 mg figure is an example input for the arithmetic; no approved bremelanotide product comes as a vial.10 mg/mL10 units: 1 mg5 mg/mL10 units: 0.5 mg3.3333 mg/mL10 units: 0.3333 mg
Retatrutide10 mg (example input)10 mg/mL10 units: 1 mg5 mg/mL10 units: 0.5 mg3.3333 mg/mL10 units: 0.3333 mg
Semaglutide10 mg (example input)No approved semaglutide product is a powder vial; this row is arithmetic on an example input.10 mg/mL10 units: 1 mg5 mg/mL10 units: 0.5 mg3.3333 mg/mL10 units: 0.3333 mg
Sermorelin5 mg (example input)5 mg/mL10 units: 0.5 mg2.5 mg/mL10 units: 0.25 mg1.6667 mg/mL10 units: 0.1667 mg
TB-50010 mg (example input)10 mg/mL10 units: 1 mg5 mg/mL10 units: 0.5 mg3.3333 mg/mL10 units: 0.3333 mg
Tesamorelin2 mg (label)The tesamorelin label gives 2 mg in 0.5 mL of the supplied diluent (4 mg/mL). No 1 to 3 mL volume is a label volume. [source]
Tirzepatide10 mg (example input)10 mg is an example vial size for arithmetic. It is not a labeled product: labeled tirzepatide comes as ready-to-use solution in pens and vials and is not reconstituted.10 mg/mL10 units: 1 mg5 mg/mL10 units: 0.5 mg3.3333 mg/mL10 units: 0.3333 mg

Printing this page, or saving it as a PDF from the browser's print dialog, keeps the heading, this table and a one-line note on a single sheet, which makes it usable as a cheat sheet beside the calculator. The directory and the longer explanations below stay on screen only. Water mL is treated as the final solution volume, and a vial or volume outside these columns needs its own calculation.

Compound chart directory: the unit each entry is logged in, and its units chart
CompoundCategoryLogged inChart
SemaglutideGLP-1mgSemaglutide units chart
TirzepatideGIP and GLP-1mgTirzepatide units chart
BPC-157PeptidemgBPC-157 units chart
TB-500PeptidemgTB-500 units chart
IpamorelinPeptidemgIpamorelin units chart
CJC-1295 (no DAC)PeptidemgCJC-1295 (no DAC) units chart
CJC-1295 (with DAC)PeptidemgCJC-1295 (with DAC) units chart
HCGAncillaryIUHCG units chart
RetatrutideGIP, GLP-1 and glucagon (investigational)mgRetatrutide units chart
CagrilintideAmylin analogue (investigational)mgCagrilintide units chart
GHK-CuPeptidemgGHK-Cu units chart
PT-141PeptidemgPT-141 units chart
SermorelinPeptidemgSermorelin units chart
TesamorelinPeptidemgTesamorelin units chart
AOD-9604PeptidemgAOD-9604 units chart
MOTS-cPeptidemgMOTS-c units chart
IGF-1 LR3PeptidemgIGF-1 LR3 units chart
DSIPPeptidemgDSIP units chart
NAD+Cellular researchmgNAD+ units chart

What is the difference between mg, mcg, mL and units?

Milligrams and micrograms measure compound amount. One milligram equals 1,000 micrograms, so the same amount can appear as 0.5 mg or 500 mcg. Milliliters measure volume instead. Connecting amount to volume requires concentration, usually written as mg per mL. A vial amount by itself does not describe concentration until a solution volume is also known.

On the U-100 scale used throughout these charts, 100 syringe units corresponds to 1 mL. A 20-unit volume is therefore 0.2 mL. If that liquid contains 5 mg per mL, the amount in that volume is 1 mg. Doubling concentration while keeping the volume fixed doubles the compound amount, even though the syringe marking stays the same.

units = dose mg ÷ (vial mg ÷ water mL) × 100

The formula first divides vial contents by volume, then divides the specified amount by that concentration. Multiplication by 100 converts the calculated milliliters to the U-100 scale. It assumes the stated water volume represents final solution volume. For an already mixed product, its actual labeled concentration is the relevant input. HCG uses IU consistently in place of mg, without treating IU as syringe markings.

A chart is not enough when vial contents, concentration, or water volume differ from the column labels. The calculator accepts your own numbers for those cases. Where the library has no presets, chart rows represent one fiftieth through one half of a vial. None of these tables establishes a personal dose, schedule, preparation method, or suitable syringe; each table describes a numerical relationship under stated assumptions.

How do you read fractional values and print the chart?

Chart cells retain up to four decimal places. A fractional unit describes the math, not a syringe's measurement precision. The label over one syringe marks a volume greater than 1 mL on the U-100 scale. Exceeds vial contents means the amount is larger than the full vial, regardless of volume. These are separate limits.

Every compound units chart has a print button. The print view keeps both tables, their vial labels, and the short reading instructions together, while omitting navigation and the longer compound profile. Selecting a PDF destination in the browser preserves that same reference. Changing vial contents or solution volume requires a new calculation.

Questions about the conversion

Do syringe units equal milligrams?

No. On a U-100 scale, 20 units represents 0.2 mL. At 5 mg per mL that volume contains 1 mg; at 10 mg per mL it contains 2 mg.

How do mcg convert to mg?

Divide mcg by 1,000 to obtain mg. For example, 250 mcg equals 0.25 mg; at 5 mg per mL that amount occupies 0.05 mL, or 5 U-100 units.

Does HCG use the same amount unit?

HCG uses IU in the library. For example, the HCG label gives 5,000 units in 10 mL as 500 units per mL. IU expresses compound amount here, while U-100 syringe units express volume.

Is there a PDF of the peptide dosing chart?

There is no separate file. Printing this page, or choosing Save as PDF in the browser print dialog, produces a one-page sheet with the concentration table; each compound units chart on its calculator page prints its own tables the same way.

Log the dose in the app

PinPoint for iOS brings dose logs, site rotation, vial and pen supply, and protocol tracking together. Log injections with compound, dose, site, and pain level, and add each vial with its strength, mix date and expiry.

Get PinPoint on the App Store

Sources

  1. Chorionic gonadotropin for injection, prescribing information DailyMed, U.S. National Library of Medicine. "Each 5,000 USP units vial contains: chorionic gonadotropin 5,000 USP Units." Reconstitution table: 1 mL gives 5,000 units per mL and 10 mL gives 500 units per mL. Retrieved 19 November 2026.
  2. Tesamorelin for injection, prescribing information DailyMed, U.S. National Library of Medicine. Section 2.2: "Reconstitute 1 vial ... with 0.5 mL of diluent (2 mg per 0.5 mL)." Retrieved 19 November 2026.
  3. Giving an insulin injection MedlinePlus, U.S. National Library of Medicine. "Standard insulin contains 100 units in 1 milliliter (mL). This is also called U-100 insulin." Retrieved 7 November 2026.

Not a source: the arithmetic shown on this page, worked from the inputs stated beside it (mg/mL = vial mg ÷ water mL; mL = amount ÷ mg/mL; U-100 units = mL × 100).