Peptide / Unit conversion
DSIP reconstitution calculator
Enter your DSIP vial size, the volume of liquid added and the dose to calculate concentration and syringe units.
Your inputs determine the result. This calculator does not recommend dosages.
Set your draw.
Enter your vial strength, diluent, and dose to see the draw.
How this is converted
Conversion follows standard mg, mL, and U-100 syringe references.
Performs unit conversions only. Not medical advice. Consult your healthcare provider.
Units chart
DSIP units chart (mg to U-100 units)
DSIP units chart: mg to U-100 units
DSIP's PinPoint entry uses a 5 mg example vial size (input). The arithmetic table provides five concrete portions of the example vial.
Vial concentration
Water mL is treated as final solution mL in these columns.
| Vial contents | 1 mL water | 2 mL water | 3 mL water |
|---|---|---|---|
| 5 mg | 5 mg/mL20 U-100 units per mg | 2.5 mg/mL40 U-100 units per mg | 1.6667 mg/mL60 U-100 units per mg |
Example vial size (input): 5 mg. No source is cited for this size; it is an arithmetic input, not a sourced fact.
Amount to units
Example amounts (arithmetic only, not doses).
| Amount (mg) | 5 mg + 1 mL | 5 mg + 2 mL | 5 mg + 3 mL |
|---|---|---|---|
| 0.1 mg | 2 units | 4 units | 6 units |
| 0.25 mg | 5 units | 10 units | 15 units |
| 0.5 mg | 10 units | 20 units | 30 units |
| 1 mg | 20 units | 40 units | 60 units |
| 2.5 mg | 50 units | 100 units | 150 unitsover one syringe |
Cited amounts
No human dose has been established. The amount table contains arithmetic examples only.
How to read this chart
units = amount ÷ (vial mg ÷ water mL) × 100
The reconstitution calculator walks through each step, and units to mg converts between mg, mcg, mL and units.
The historical reference in the library
PinPoint cites a peer-reviewed review for DSIP and notes that a modern human reference source was not found in its source material. The low-confidence flag is enabled for the stored model. This is a specific description of the evidence behind the entry, not an empty field that the chart fills with a new clinical claim. The concentration values remain calculable because they rely on a vial amount and a volume. A historical pharmacology reference and an example vial size contribute different kinds of information to the page.
Reading the upper example row
The DSIP example vial size (input) is 5 mg. One half of that total is 2.5 mg, the final row of the arithmetic ladder. It occupies 0.5 mL if the whole vial is represented in 1 mL, or 1.5 mL if the whole vial is represented in 3 mL. Those volumes span 50 and 150 U-100 units. The latter receives the over-one-syringe marker while remaining only half of the vial's contents. A capacity flag and a vial-amount comparison therefore answer different questions.
Compound profile
DSIP at a glance
DSIP, short for delta sleep-inducing peptide, is a nine-amino-acid peptide investigated in sleep research.[1] PinPoint marks human model data as limited and says modern pharmacokinetic characterization is not established by its reference set.
- Regulatory status
- FDA listed emideltide (DSIP) among bulk drug substances for compounding that may present significant safety risks, a nomination later withdrawn; FDA says it lacks sufficient information to know whether the drug would cause harm if given to humans.[3]
- Half-life
- About 4 minutes in dogs, 2.9 minutes in one monkey and 2 minutes in rats after intravenous injection in a 1984 study; no human value is cited.[2]
- Route
- The cited review describes intravenous infusion studies. No source here describes subcutaneous use in people.[1]
- Category
- Peptide
- Vial size
- 5 mg, example vial size (input)
Evidence
What the research says
The cited historical review examines delta sleep-inducing peptide as a proposed sleep-related signaling factor. It summarizes observations in rabbits, rats, mice, cats, and humans rather than presenting one uniform study population. The peptide was characterized as a nine-amino-acid molecule, with species differences in reported sleep effects.[1]
The review discusses infusion experiments and relationships between administration amount, infusion time, and sleep observations. It also surveys electrophysiological activity, circadian patterns, neurotransmitter measurements, and hormone levels. Those diverse outcomes should not be collapsed into one reproducible duration of sleep or one modern pharmacokinetic estimate.[1]
DSIP-like material was measured with immunological techniques in brain, in peripheral organs of the rat, and in plasma of several mammals. Such detection provides biological context without establishing that all detected material was identical intact peptide. PinPoint therefore describes human model data as limited and does not claim a modern validated disposition profile from this review.[1]
Timing
Half-life and timing
About 4 minutes in dogs, 2.9 minutes in one monkey and 2 minutes in rats after intravenous injection in a 1984 study; no human value is cited.[2]
Calculator details
About this calculation.
Is there a published DSIP half-life?
The cited review gives no half-life in its abstract. In a 1984 study, DSIP injected intravenously left plasma with a mean half-life of about 4 minutes in dogs, 2.9 minutes in one monkey and 2 minutes in rats. No human value is cited here.[1][2]
Can a DSIP calculator establish how long a subjective response lasts?
It has no variable representing a subjective response. Converting vial units cannot create a measured relationship between a timing value and an experience.
What is the role of the historical DSIP review on this page?
It identifies the research context carried by the library. The record does not present it as a modern, complete human pharmacokinetic dataset.[1]
What concentration is DSIP at 5 mg in 1 mL?
5 mg divided by 1 mL is 5 mg per mL. That volume spans 100 U-100 syringe units.
How does 2 mL change the concentration of this DSIP vial?
5 mg divided by 2 mL is 2.5 mg per mL, half the concentration in the 1 mL column.
What does the 3 mL column mean for DSIP?
5 mg divided by 3 mL is approximately 1.6667 mg per mL. The full 3 mL volume corresponds to 300 U-100 units.
How many units is 0.5 mg of DSIP from this vial in 2 mL?
0.5 mg divided by 2.5 mg per mL is 0.2 mL, or 20 U-100 units.
References
Sources
Sources checked against the cited documents on 19 November 2026.
- Delta-sleep-inducing peptide (DSIP): a review, 1984 (PubMed 6145137)Abstract read 19 November 2026; the full text is paywalled.Retrieved 2026-11-19 · review
- DSIP plasma half-life in dogs, a monkey and rats, 1984 (PubMed 6379493)Abstract: "a mean half-life of 4.0 +/- 0.7 min in the dogs ... a half-life of 2.9 and 2.0 +/- 0.54 min" (one monkey; rats), intravenous.Retrieved 2026-11-19 · animal-study
- FDA, certain bulk drug substances for use in compounding that may present significant safety risksContent current as of 22 April 2026; read on 19 November 2026.Retrieved 2026-11-19 · regulator
- PinPoint App Store descriptionFeature wording from the approved application description, not pricing.Retrieved 2026-10-05 · app-description
From the same library
Related calculators
Keep exploring
More tools
- Peptide tracker app Trackers
- GLP-1 tracker app GLP-1
- TRT tracker app Trackers
- Compare trackers Compare
- Peptide calculator Vial, dose and syringe unit math.
- Reconstitution calculator Any powder vial: mg/mL, mL and units.
- BPC-157 TB-500 blend calculator Two peptides in one vial: mg per draw and units.
- KLOW peptide blend calculator KPV, GHK-Cu, BPC-157 and TB-500 in one vial.
- GLOW peptide blend calculator GHK-Cu, BPC-157 and TB-500 in one vial.
- CJC-1295 ipamorelin calculator Two-peptide vial: mcg per draw and units.
- AOD-9604 calculator Reconstitution, concentration and units.
- BPC-157 calculator Reconstitution, concentration and units.
- Cagrilintide calculator Reconstitution, concentration and units.
- CJC-1295 (no DAC) calculator Reconstitution, concentration and units.
- CJC-1295 (with DAC) calculator Reconstitution, concentration and units.
- GHK-Cu calculator Reconstitution, concentration and units.
- HCG calculator Reconstitution, concentration and units.
- IGF-1 LR3 calculator Reconstitution, concentration and units.
- Ipamorelin calculator Reconstitution, concentration and units.
- MOTS-c calculator Reconstitution, concentration and units.
- PT-141 calculator Reconstitution, concentration and units.
- Retatrutide calculator Reconstitution, concentration and units.
- Semaglutide calculator Reconstitution, concentration and units.
- Sermorelin calculator Reconstitution, concentration and units.
- TB-500 calculator Reconstitution, concentration and units.
- Tesamorelin calculator Reconstitution, concentration and units.
- Tirzepatide calculator Reconstitution, concentration and units.
- Peptide dosing chart Compare vial concentrations and amount-to-units tables across the compound charts.
- Units to mg calculator Convert U-100 syringe units, mg and mL using your own concentration.
- TRT dose calculator Divide weekly mg into amounts and volumes per injection at a known concentration.
- GLP-1 guides GLP-1
- GLP-1 injection sites GLP-1
- GLP-1 doses in units and mL GLP-1
- Tirzepatide dose schedule GLP-1
- Peptide library Guides
- Liraglutide guide Guides
- Somatropin guide Guides
- SS-31 guide Guides
- Learn explainers Learn
- KLOW peptide blend explained Learn
- BPC-157 and TB-500 explained Learn
- SS-31 and MOTS-c explained Learn
- HGH and somatropin, IU to mg Learn
- Levocarnitine explained Learn
- VIP peptide and aviptadil explained Learn
- CagriSema explained Learn
Your next chapter starts here
Start Day 1 with
your numbers in place.
Your doses, your schedule, your picture. Bring it together in PinPoint.
Built for iPhone.
Subscription through the App Store, cancel anytime in your Apple ID settings.