PinPoint Get PinPoint on the App Store

Blend / Unit conversion

CJC-1295 ipamorelin dosage calculator

A CJC-1295 ipamorelin blend is one vial with two label amounts. Enter both, the water and a draw, and the calculator shows how many mcg of each peptide the draw holds and how many U-100 units it is.

The rows open with the library's package examples (CJC-1295 (no DAC) 5 mg, Ipamorelin 5 mg). Replace them with your vial's label. This calculator converts your inputs and does not recommend dosages.

Live readout

Set your draw.

Enter your vial strength, diluent, and dose to see the draw.

Mode
Resulting concentration -- mg/mL
Doses per vial --
Syringe

Conversion follows standard mg, mL, and U-100 syringe references.

Performs unit conversions only. Not medical advice. Consult your healthcare provider.

Save preset

After saving, open Presets at the top of the calculator to recall this setup.

Saved presets

No saved presets

Save a conversion from the calculator to recall it later.

    One vial, several amounts

    What is a CJC-1295 ipamorelin blend?

    CJC-1295 and ipamorelin are two growth hormone secretagogues that act on different receptors. Sold as a blend, they share one powder vial and one volume of water, so each draw carries both in the proportion set by the label. The examples here use the library's CJC-1295 entry without DAC; the DAC form is a different molecule with a different package size.

    The search for a cjc-1295 ipamorelin dosage calculator is usually a units question: how many units hold a given number of micrograms. In a blend that question has two answers per draw, one per component, and both come from the same volume. Amounts for this pair are often counted in mcg, so the calculator shows mcg next to mg for every component.

    No source in PinPoint's library studied the pair, as the CJC-1295 and ipamorelin stack guide explains. This page converts numbers and suggests no amount, proportion or timing.

    Units per fraction of the vial

    CJC-1295 ipamorelin dosage calculator: printable chart

    CJC-1295 ipamorelin chart: units per fraction of the vial

    The first table uses the library's package examples, 5 mg of CJC-1295 (no DAC) and 5 mg of ipamorelin, the same pair the stack guide converts. Because the two totals match, every row holds the same mass of each; that comes from these example labels, not from the compounds. The second table expresses each row per 1 mg on the label for any other combination.

    CJC-1295 (no DAC) 5 mg, Ipamorelin 5 mg (library package examples): U-100 units and milligrams per fraction of the vial
    Fraction of the vial Units in 1 mLUnits in 2 mLUnits in 3 mL CJC-1295 (no DAC) (5 mg label)Ipamorelin (5 mg label)
    1/20 one twentieth 5 units 0.05 mL 10 units 0.1 mL 15 units 0.15 mL 0.25 mg 250 mcg 0.25 mg 250 mcg
    1/10 one tenth 10 units 0.1 mL 20 units 0.2 mL 30 units 0.3 mL 0.5 mg 500 mcg 0.5 mg 500 mcg
    1/5 one fifth 20 units 0.2 mL 40 units 0.4 mL 60 units 0.6 mL 1 mg 1,000 mcg 1 mg 1,000 mcg
    1/4 one quarter 25 units 0.25 mL 50 units 0.5 mL 75 units 0.75 mL 1.25 mg 1,250 mcg 1.25 mg 1,250 mcg
    1/2 one half 50 units 0.5 mL 100 units 1 mL 150 units 1.5 mL over one syringe 2.5 mg 2,500 mcg 2.5 mg 2,500 mcg
    Any label: U-100 units per fraction of the vial, and milligrams per 1 mg printed on the label
    Fraction of the vial Units in 1 mLUnits in 2 mLUnits in 3 mL Per 1 mg on the label
    1/20 one twentieth 5 units 10 units 15 units 0.05 mg 50 mcg
    1/10 one tenth 10 units 20 units 30 units 0.1 mg 100 mcg
    1/5 one fifth 20 units 40 units 60 units 0.2 mg 200 mcg
    1/4 one quarter 25 units 50 units 75 units 0.25 mg 250 mcg
    1/2 one half 50 units 100 units 150 units over one syringe 0.5 mg 500 mcg

    One twentieth of the vial in 2 mL is 10 units and holds 250 mcg of each with the example label. In 1 mL the same share is 5 units. A cell marked over one syringe holds more than 100 units.

    The print button puts both tables on one sheet, and saving that view as a PDF keeps the same numbers.

    Fractions, volumes and amounts are arithmetic from the label figures shown, not doses. Water mL is treated as the final volume, and 100 U-100 units equal 1 mL.

    The calculation

    How the math works

    Example: the label rows above, mixed to 2 mL, with a draw of 10 units.

    Each component = label amount ÷ final mL

    Draw volume = units ÷ 100, or the amount ÷ that component's concentration

    In the draw = draw mL × each concentration

    CJC-1295 (no DAC): 5 mg ÷ 2 mL = 2.5 mg/mL

    Ipamorelin: 5 mg ÷ 2 mL = 2.5 mg/mL

    10 u ÷ 100 u/mL = 0.10 mL

    0.10 mL ÷ 2 mL = 5% of the vial

    CJC-1295 (no DAC): 0.10 mL × 2.5 mg/mL = 0.25 mg

    Ipamorelin: 0.10 mL × 2.5 mg/mL = 0.25 mg

    0.10 mL × 100 u/mL = 10 u

    Each concentration is a label amount over the shared volume. 5 mg in 2 mL is 2.5 mg/mL, which is 2,500 mcg/mL, for each component with the example label.

    On a U-100 syringe each unit is 0.01 mL, so at that concentration each unit holds 25 mcg of CJC-1295 and 25 mcg of ipamorelin. 10 units is 0.1 mL and holds 250 mcg of each.

    A different label breaks the symmetry at once. With unequal amounts, the same draw holds different mcg of each, and the calculator lists both. If a draw is entered as mcg of ipamorelin, the calculator converts it to a volume through the ipamorelin concentration and then reads the CJC-1295 in that volume.

    Doses per vial follow the share. A 10 units draw from 2 mL is one twentieth, so the vial holds 20 such draws, and both components finish together.

    Reading a CJC-1295 ipamorelin label

    The calculator needs one amount per component. Most blend labels print each peptide's milligrams separately, and those are the figures to enter. If a label prints only a combined total for the vial, the split between CJC-1295 and ipamorelin is not on it, and no calculator can recover the two amounts from the total alone.

    Watch the unit too. A label in mg and a draw in mcg are both fine, since the calculator converts between them, but a label figure entered in the wrong unit is off by a factor of 1,000. The readout lists mcg and mg for each component, which makes a slip of that size easy to spot.

    The two rows above open with the library's package examples. Replace them with your label, enter the water the vial was mixed with, and then enter a draw in units, mL or an amount of one component. Nothing is computed until a draw is entered, because the calculator does not assume one.

    Two compounds, two entries

    Each compound has its own entry in PinPoint's library, so a blend draw can be logged by hand as two entries, each with its own mcg. That keeps totals and the modeled level for CJC-1295 apart from ipamorelin, which a single blend line would merge.

    When the two amounts need to differ from the label's proportion, separate vials are required. The CJC-1295 no-DAC calculator and the ipamorelin calculator handle one vial each, and CJC-1295 with DAC vs no DAC compares the two forms.

    Calculator details

    About this blend calculation.

    Does this calculator give a CJC-1295 ipamorelin dosage?

    No. It converts the label amounts, water and draw you enter into mcg, mg and units. It does not suggest an amount, a proportion or a timing.

    How many mcg are in one unit of a 5 mg + 5 mg vial?

    In 2 mL each component is 2,500 mcg/mL, so one U-100 unit (0.01 mL) holds 25 mcg of each. In 1 mL it would be 50 mcg of each per unit.

    How many units is 250 mcg of ipamorelin in this blend?

    With 5 mg of ipamorelin in 2 mL, 250 mcg is 0.1 mL, or 10 units. That same draw holds 250 mcg of CJC-1295 with the example label.

    Does it work for CJC-1295 with DAC?

    Yes. Replace the name and enter the label amount; the arithmetic is the same for any component. The library's DAC package example is a different size from the no-DAC example.

    Can I save a blend setup?

    Yes. Save preset stores the components, the water and the draw in this browser, and Presets recalls them later. Share copies a link that reopens the same setup.

    What does share of the vial mean in the readout?

    It is the draw volume divided by the final volume. A draw of 10 units from 2 mL is 5% of the vial, so it holds 5% of each label amount.

    From the same library

    Related calculators

    Keep your protocol together

    Track the result in the app.

    Set up vials, log each compound's dose and site, and see your next reminder in PinPoint for iOS.

    Download on the App Store
    The PinPoint app showing syringe units and draw volume
    PINPOINT / YOUR INPUTS, CONVERTED

    Keep exploring

    More tools

    PinPoint app icon

    Your next chapter starts here

    Start Day 1 with
    your numbers in place.

    Your doses, your schedule, your picture. Bring it together in PinPoint.

    Download on the App Store

    Built for iPhone.

    Subscription through the App Store, cancel anytime in your Apple ID settings.