GLP-1 / Unit conversion
Semaglutide reconstitution calculator
Enter your Semaglutide vial size, the volume of liquid added and the dose to calculate concentration and syringe units.
Your inputs determine the result. This calculator does not recommend dosages.
Set your draw.
Enter your vial strength, diluent, and dose to see the draw.
How this is converted
Conversion follows standard mg, mL, and U-100 syringe references.
Performs unit conversions only. Not medical advice. Consult your healthcare provider.
Units chart
Semaglutide units chart (mg to U-100 units)
Semaglutide units chart: mg to U-100 units
Semaglutide's chart uses a 10 mg example vial size (input) for arithmetic only; the label's once-weekly amounts are listed separately, as the label gives them. The generic molecule sits in the GLP-1 category; the app describes it as a GLP-1 receptor agonist.
Vial concentration
Water mL is treated as final solution mL in these columns.
| Vial contents | 1 mL water | 2 mL water | 3 mL water |
|---|---|---|---|
| 10 mg | 10 mg/mL10 U-100 units per mg | 5 mg/mL20 U-100 units per mg | 3.3333 mg/mL30 U-100 units per mg |
Example vial size (input): 10 mg. No source is cited for this size; it is an arithmetic input, not a sourced fact.
Amount to units
Example amounts (arithmetic only, not doses).
| Amount (mg) | 10 mg + 1 mL | 10 mg + 2 mL | 10 mg + 3 mL |
|---|---|---|---|
| 0.2 mg | 2 units | 4 units | 6 units |
| 0.5 mg | 5 units | 10 units | 15 units |
| 1 mg | 10 units | 20 units | 30 units |
| 2 mg | 20 units | 40 units | 60 units |
| 5 mg | 50 units | 100 units | 150 unitsover one syringe |
The label's amounts
The cited label's product is a solution in prefilled pens (2 mg/3 mL, 4 mg/3 mL and 8 mg/3 mL), not a vial. The rows below are the amounts its dosage section states.
| Amount (mg) and source context | Frequency as stated | Route as stated | Source |
|---|---|---|---|
| 0.25 mgAdult label escalation step; first 4 weeks. The label states the 0.25 mg dosage is intended for treatment initiation, not for glycemic control. | Once weekly | Subcutaneous | Semaglutide prescribing information (2026)Regulatory labelRetrieved 2026-11-19 |
| 0.5 mgAdult label escalation step; subsequent step in section 2.2. | Once weekly | Subcutaneous | Semaglutide prescribing information (2026)Regulatory labelRetrieved 2026-11-19 |
| 1 mgAdult label escalation step; subsequent step in section 2.2. | Once weekly | Subcutaneous | Semaglutide prescribing information (2026)Regulatory labelRetrieved 2026-11-19 |
| 2 mgAdult label escalation step; subsequent step in section 2.2. | Once weekly | Subcutaneous | Semaglutide prescribing information (2026)Regulatory labelRetrieved 2026-11-19 |
How to read this chart
units = amount ÷ (vial mg ÷ water mL) × 100
The reconstitution calculator walks through each step, and units to mg converts between mg, mcg, mL and units.
A week-long model reference
PinPoint stores a semaglutide half-life of 168 hours, exactly seven days. That value sets the elimination timescale for the app's estimated levels. It gives a log spanning several weeks a different shape from a peptide entry measured in minutes. The label's schedule is once weekly. Those two intervals happen to match, but they have different jobs: one shapes a modeled curve, while the other is the label's schedule.
Absorption has its own clock
The label states 89% absolute bioavailability and that maximum concentration is reached 1 to 3 days after a dose; the app uses 36 hours as an estimate within that range. A logged timestamp anchors that absorption timeline, so a curve can still be rising well after the entry's recorded time. The concentration table above has no time axis; dividing milligrams by milliliters remains the same at every point on the model's clock.
One generic record, four label amounts
Subcutaneous is the route on the label, and the app's dose unit is mg. The label's amounts are 0.25, 0.5, 1, and 2 mg once weekly, and its product is a solution in prefilled pens. The label block lists those amounts as the label gives them; this page does not turn them into syringe units or volumes.
Where the 10 mg reference comes from
The semaglutide vial field holds 10 mg as an example vial size (input); no source describes it, and it is not a labeled product. Across the water columns, the 10 mg total gives 10, 5, and approximately 3.3333 mg per mL. The example rows are fractions of that 10 mg total, from 0.2 to 5 mg, and none of them is a dose. Fractional markings are retained instead of being rounded to a whole unit.
Units, mL and mg/mL
Semaglutide dosage in units and mL
Searches for Semaglutide dosage in units or in mL are conversion questions. Units and mL both measure volume, and what a volume holds depends on how the vial was mixed. The first table gives the concentration of a 10 mg Semaglutide example vial (input) at 1, 2 and 3 mL of water; the second shows how many U-100 units each share of the vial takes, and what that share holds. Neither table sets a dose.
| Water added | Concentration | Units per 1 mg | 10 units (0.1 mL) holds |
|---|---|---|---|
| 1 mL | 10 mg/mL10,000 mcg/mL | 10 units0.1 mL | 1 mg1,000 mcg |
| 2 mL | 5 mg/mL5,000 mcg/mL | 20 units0.2 mL | 0.5 mg500 mcg |
| 3 mL | 3.33 mg/mL3,333.33 mcg/mL | 30 units0.3 mL | 0.3333 mg333.3 mcg |
| Fraction of the vial | Holds | Units in 1 mL | Units in 2 mL | Units in 3 mL |
|---|---|---|---|---|
| 1/20 one twentieth | 0.5 mg500 mcg | 5 units 0.05 mL | 10 units 0.1 mL | 15 units 0.15 mL |
| 1/10 one tenth | 1 mg1,000 mcg | 10 units 0.1 mL | 20 units 0.2 mL | 30 units 0.3 mL |
| 1/5 one fifth | 2 mg2,000 mcg | 20 units 0.2 mL | 40 units 0.4 mL | 60 units 0.6 mL |
| 1/4 one quarter | 2.5 mg2,500 mcg | 25 units 0.25 mL | 50 units 0.5 mL | 75 units 0.75 mL |
| 1/2 one half | 5 mg5,000 mcg | 50 units 0.5 mL | 100 units 1 mL | 150 units 1.5 mL over one 100-unit syringe |
Semaglutide 10 mg reconstitution: worked example
A 10 mg Semaglutide vial mixed with 2 mL of bacteriostatic water holds 5 mg/mL, or 5,000 mcg/mL. On a U-100 syringe 10 units is 0.1 mL, and at this concentration it holds 0.5 mg (500 mcg), one twentieth of the vial. The whole 10 mg is 200 units at 2 mL, more than one 100-unit syringe holds. Mixed with 1 mL instead, the vial is 10 mg/mL and 10 units hold 1 mg; with 3 mL it is 3.33 mg/mL and 10 units hold 0.3333 mg.
Semaglutide label steps converted at the example concentrations used on the GLP-1 pages are tabulated on GLP-1 label steps in units and mL. This section converts a 10 mg example vial only.
Arithmetic from the example vial size (input) shown, not doses. Water mL is treated as the final volume; a different vial entered in the calculator above gets the same formulas.
Compound profile
Semaglutide at a glance
Semaglutide is an FDA-approved GLP-1 receptor agonist.[1] The cited label is for a once-weekly injection for adults with type 2 diabetes. This guide follows the generic molecule in PinPoint's library and the subcutaneous reference used for its tracking model.
- Regulatory status
- Semaglutide is an FDA-approved prescription medicine (first US approval 2017); the cited label is for a once-weekly injection for adults with type 2 diabetes.[1]
- Half-life
- Approximately 1 week (elimination half-life); semaglutide is present in the circulation for about 5 weeks after the last dose, per the label.[1]
- Route
- Subcutaneous, per the label.[1]
- Category
- GLP-1
- Label schedule
- Once weekly, per the label.[1]
- Vial size
- 10 mg, example vial size (input)
This semaglutide record is anchored to the injected molecule. Its weekly timing reference comes from the label, while the 10 mg figure is an example vial size (input) with no verified source.[1]
Evidence
What the research says
The cited prescribing information describes subcutaneous pharmacokinetic studies in people with type 2 diabetes. Researchers measured circulating semaglutide concentrations to estimate exposure, clearance, and distribution. Exposure increased proportionally across the studied weekly strengths; the label reports an elimination half-life of approximately one week.[1]
Absorption measurements showed 89% absolute bioavailability and peak concentrations one to three days after injection. Exposure was similar across abdomen, thigh, and upper-arm injection sites. These findings concern the injectable formulation described in the label, including its route and study population.[1]
The label also describes extensive albumin binding and breakdown through cleavage of the peptide backbone and fatty-acid sidechain. Semaglutide-related material leaves through urine and feces, with only a small fraction excreted intact. This injectable label does not cover oral semaglutide.[1]
Timing
Half-life and timing
Approximately 1 week (elimination half-life); semaglutide is present in the circulation for about 5 weeks after the last dose, per the label.[1]
A seven-day interval contains 168 hours. Following one hypothetical starting amount across two such intervals gives 25% at 336 hours; across three gives 12.5% at 504 hours. The five-interval endpoint is 840 hours, or 35 days, with 3.125% remaining. These percentages describe exponential arithmetic with the 168-hour value held constant. They leave out absorption and additional entries, and neither the endpoint nor the one-week label reference defines an individual's elimination time.
Read the Semaglutide half-life on its label schedule pageCalculator details
About this calculation.
Does a semaglutide mixing chart describe a prefilled pen?
A powder-vial mixing chart and a prepared pen describe different presentations. Neither a generic molecule name nor arithmetic establishes that the two products have equivalent formulations.[1]
Can a semaglutide reconstitution calculator use the tablet reference?
The injection reference does not establish tablet absorption or liquid preparation. A calculator cannot convert an oral product into an injectable presentation or supply a missing verified research-vial amount.[1]
Why does a semaglutide half-life page show a five-week endpoint?
Five repetitions of the stored seven-day interval equal 35 days. The model still retains one thirty-second of its starting amount there. The label itself says semaglutide is present in the circulation for about 5 weeks after the last dose. That arithmetic endpoint is neither proof of zero remaining compound nor a personal instruction about waiting five weeks.[1]
What concentration is Semaglutide at 10 mg in 1 mL?
10 mg divided by 1 mL is 10 mg per mL. That volume spans 100 U-100 syringe units.
How does 2 mL change the concentration of this Semaglutide vial?
10 mg divided by 2 mL is 5 mg per mL, half the concentration in the 1 mL column.
What does the 3 mL column mean for Semaglutide?
10 mg divided by 3 mL is approximately 3.3333 mg per mL. The full 3 mL volume corresponds to 300 U-100 units.
How many units is 0.2 mg of Semaglutide from this vial in 2 mL?
0.2 mg divided by 5 mg per mL is 0.04 mL, or 4 U-100 units.
References
Sources
Sources checked against the cited documents on 19 November 2026.
- Semaglutide injection, once-weekly pen for type 2 diabetes, prescribing information (DailyMed, SPL effective 1 June 2026)Manufacturer label read 19 November 2026 (replaces a 2023 repackager copy): Highlights (initial US approval 2017), 2.2, 3, 11, 12.3.Retrieved 2026-11-19 · label
- PinPoint App Store descriptionFeature wording from the approved application description, not pricing.Retrieved 2026-10-05 · app-description
From the same library
Related calculators
Keep exploring
More tools
- Peptide tracker app Trackers
- GLP-1 tracker app GLP-1
- TRT tracker app Trackers
- Compare trackers Compare
- Peptide calculator Vial, dose and syringe unit math.
- Reconstitution calculator Any powder vial: mg/mL, mL and units.
- BPC-157 TB-500 blend calculator Two peptides in one vial: mg per draw and units.
- KLOW peptide blend calculator KPV, GHK-Cu, BPC-157 and TB-500 in one vial.
- GLOW peptide blend calculator GHK-Cu, BPC-157 and TB-500 in one vial.
- CJC-1295 ipamorelin calculator Two-peptide vial: mcg per draw and units.
- AOD-9604 calculator Reconstitution, concentration and units.
- BPC-157 calculator Reconstitution, concentration and units.
- Cagrilintide calculator Reconstitution, concentration and units.
- CJC-1295 (no DAC) calculator Reconstitution, concentration and units.
- CJC-1295 (with DAC) calculator Reconstitution, concentration and units.
- DSIP calculator Reconstitution, concentration and units.
- GHK-Cu calculator Reconstitution, concentration and units.
- HCG calculator Reconstitution, concentration and units.
- IGF-1 LR3 calculator Reconstitution, concentration and units.
- Ipamorelin calculator Reconstitution, concentration and units.
- MOTS-c calculator Reconstitution, concentration and units.
- PT-141 calculator Reconstitution, concentration and units.
- Retatrutide calculator Reconstitution, concentration and units.
- Sermorelin calculator Reconstitution, concentration and units.
- TB-500 calculator Reconstitution, concentration and units.
- Tesamorelin calculator Reconstitution, concentration and units.
- Tirzepatide calculator Reconstitution, concentration and units.
- Peptide dosing chart Compare vial concentrations and amount-to-units tables across the compound charts.
- Units to mg calculator Convert U-100 syringe units, mg and mL using your own concentration.
- TRT dose calculator Divide weekly mg into amounts and volumes per injection at a known concentration.
- GLP-1 guides GLP-1
- GLP-1 injection sites GLP-1
- GLP-1 doses in units and mL GLP-1
- Tirzepatide dose schedule GLP-1
- Peptide library Guides
- Liraglutide guide Guides
- Somatropin guide Guides
- SS-31 guide Guides
- Learn explainers Learn
- KLOW peptide blend explained Learn
- BPC-157 and TB-500 explained Learn
- SS-31 and MOTS-c explained Learn
- HGH and somatropin, IU to mg Learn
- Levocarnitine explained Learn
- VIP peptide and aviptadil explained Learn
- CagriSema explained Learn
Your next chapter starts here
Start Day 1 with
your numbers in place.
Your doses, your schedule, your picture. Bring it together in PinPoint.
Built for iPhone.
Subscription through the App Store, cancel anytime in your Apple ID settings.